ASV RC80 Reman Hydraulic Final Drive Motor

D:3.5469 in; bore type:Round; lubrication type:Lubrication Fitting; seal type:Contact with Flinger; B:4.4375 in; radial dynamic load capacity:2150 lbf; length through bore:0.866 in; mounting type:Two-Bolt Flange; replacement bearing:UC204-12; radial static load capacity:1080 lbf;

locking device:Set Screw; manufacturer catalog number:023263; slot width:0.8125 in; rod hole diameter:1-1/8 in; unit type:Side Mount; housing material:Cast Iron; lubrication type:Lubrication Fitting; seal type:Triple Lip; finish/coating:Uncoated; d:2.1875 in;

precision rating:Not Rated; cage material:Polyamide; number of rows:1; maximum rpm:10200 RPM; flanges:(4) Flange; finish/coating:Uncoated; static load capacity:63000 N; bore type:Straight; ring separation:Separable Ring; outer ring width:19 mm;

length to ball center:35 mm; radial static load capacity:2225.61 lbf; race material:Brass; housing material:Carbon Steel; manufacturer product page:Click here; grade:Metric Precision; series:Schaublin®; lubrication type:Non-Lubricatable; shank thread size:M5 x 0.8; ball material:Chrome Steel;

d:1.76 in; series:TTC; fillet radius:0.03 in; operating temperature range:-65 to +250 &de; thrust bearing type:Tapered Race; D:3.266 in; B:15/16 in;

SDM_:250; C0:675; Ew:282; TSR rpm:2400; Z_:19; rb:3; Prod_Type3:CRB_SR_NF; C_conv:495000; DE_:282; C:495;

D:47 mm; series:6000; dynamic load capacity:10071; d:25 mm; operating temperature range:120° to 248°; cage material:Carbon Steel; Weight:0.170 lb; snap ring included:Without Snap Ring; maximum rpm:16000 RPM; bore type:Round;

locking device:Eccentric Collar; finish/coating:Uncoated; outer ring width:22 mm; bore type:Round; D:90 mm; d:50 mm; maximum rpm:2500 RPM; snap ring included:Without Snap Ring; inner ring width:30.18 mm; B:1-3/16 in;

lubrication hole location:.3125 in; head type:Hex; closure type:Sealed; stud type:Standard; bearing element:Non-Metallic Bushing; thread size:1/2-20; roller shape:Flat; roller diameter:1.2500 in; roller material:Steel; stud diameter:0.5000 in;

abma precision rating:Class 2; manufacturer upc number:053893535654; d:6.5000 in; bearing material:Steel;

d:120mm; SKU:23124cc/w33-qbl; Cage Type:Steel; B:62mm; Seals or Shields:Open Type; D:200mm; Availability:In Stock; Weight:0.02 KGS; Clearance:Standard;

Clearance:Standard; Static Load Rating (kN):67; D:120mm; Grease Limiting Speed (r/min):3800; Seals or Shields:Open Type; Dynamic Load Rating (kN):67; Weight:1.45 KGS; B:31mm; d:65mm; Availability:In Stock;

thread direction:Left Hand; d:0.3125 in; head width:0.344 in; standards met:SAEJ1120; rod end type:Male Threaded; head diameter:0.875 in; shank thread size:5/16-24 in; grade:Precision; housing material:Alloy Steel Heat Tre; ball width:0.437 in;

d:70 mm; fillet radius:1.5 mm; outer ring width:24 mm; ring separation:Separable Outer Ring; flanges:(2) Inner; D:125 mm; series:N2; operating temperature range:-30 to +120 &de; closure type:Open; precision rating:Not Rated;

replacement bearing:KH208; series:KHFT200; housing material:Cast Iron; radial dynamic load capacity:2150 lbf; B:171 mm; mounting type:Two-Bolt Flange; duty type:Standard Duty; lubrication type:Lubrication Fitting; radial static load capacity:1080 lbf; locking device:Eccentric Collar;